Our 9 step cleaning process

Step 1: Pre-Inspection
Our Technician will do a walk through inspection with you to identify soiling conditions, carpet construction, and potential permanent stains.


Step 2: Pre-vacuum

Your carpet is pre-vacuumed with a commercial vacuum to remove bonded, insoluble dry soil.



Step 3: Pre-spot

Certain spots are pre-treated for maximum removal.



Step 4: Pre-Spray

Traffic areas are treated with a preconditioning agent to break down soil and general spots.


step 5: Pre-Agitate

Your carpet will be pre-groomed with a carpet groomer to loosen traffic area soil.



Step 6: Extract and Rinse

Once the soil has been loosened, our state-of-the-art truck-mounted hot water extraction cleaning process will thoroughly flush the carpet pile. Pressure and heat are regulated to prevent the carpet from being over-wet.

Step 7: Neutralizer

The pH is balanced on every carpet and fabric cleaned. This is one of the most important steps according to the manufacturers of carpet. It is accomplished during the extract & rinse process or a post spray will be applied.

Step 8: Post Spot Treatment

Potential permanent stains, as identified by the technician, may not be removed.



Step 9: Speed Dry (upon request)

High velocity air movers are placed upon customer request on the carpet to lessen the drying time.